Device Settings: Additional EzCad3 Settings
The Additional EzCad3 Settings tab of LightBurn's Device Settings allows you to manually configure your EzCad3 Device if a MarkCfg0 file is unavailable.
Most users should not change these settings
The settings here are normally configured when you import a MarkCfg0 file while adding your EzCad3 laser to LightBurn, but we've made the settings manually configurable in case the configuration file is unavailable. If you're not sure what you're doing, you should probably leave this tab alone unless told otherwise by support.
The Additional EzCad3 Settings tab of Device Settings
-
Dimensions / Units¶
Per-device unit and dimension settings.
-
Basic Settings¶
The most commonly used device settings.
-
GCode¶
Modify GCode output for GCode Devices.
-
Additional Settings¶
Settings for simulating previews and estimating time.
-
Custom GCode¶
Advanced GCode customization for the Custom GCode device type.
-
Galvo and Basic Settings¶
The most commonly used device settings for Galvo lasers.
-
Ports and Laser Settings¶
Configure a Galvo laser's ports and laser source.