Skip to content

Taper Warp

Available in LightBurn 1.5 and higher

The Taper Warp Tool assists in rotary engravings on tapered objects by compensating for the difference in diameter between the top and the bottom.

The Taper Warp dialog box

Using Taper Warp

  1. Select which side of the artwork is at the top of the object
  2. Measure the diameter of the top of the object
  3. Measure the diameter of the bottom of the object
  4. Measure the distance between top and bottom
  5. Enter measurements into the dialog box and press OK

Results

The orange tool layers represent the text and its boundaries before being altered by Taper Warp